| The System | |
| Models | |
 |
Features & Options |
| Contact Us | |
| Dimensions | |
| Photos | |
| Home |
 Portable Hazardous Materials Storage Structures |
Features |
ECP portable hazardous materials buildings are constructed with a number of engineering innovations that make them the most user friendly on the market. Consider these:
Beneficial Features
- All doors open on the corner posts, not just pallet wide. The 56" to 448" widths available allow access to drums and shelving in the rear of the facility without the necessity of moving drums out of the way.
- Factory Mutual approved explosion relief panels are provided when required by code or local jurisdiction.
- ECP provides heavy-duty load spreaders to prevent doors from sagging under the weight of heavy drums.
- Fork-lift guards are standard on ECP buildings as are static ground connections.
- ECP buildings meet and or exceed code requirements.*
Also Available
| ECP makes steel secondary containment pallets. They provide effective containment areas where roofs and security are not required. They provide easy access, and are built with the same type of grid floor, the same coating systems and one-piece sumps and fork-lift guards as are used in the full buildings. |
|
ECP prefabricated, weatherproofed buildings offer the finest, low-cost solution to meeting the requirements for safe storage of chemical hazards in your facility.
They also assure safe secondary containment for ground water protection, meet fire safety needs, minimize liability and safeguard personnel while complying with federal, state and local regulations.*
*Local jurisdictions have final authority.
Whether your needs are for larger containers such as 55 gallon drums or for smaller containers such as 1 liter, 4 liters, 1 gallon or 5 gallon or a combination of both.
The cost of storage per unit is reduced by as much as 50% compared to other portable structures when you select ECP Modular Buildings for your hazardous storage needs.
Standard
specifications and features
Dimensions |
Options .
|
Seismic Secondary Containment™ Shelving*
|
For laboratories,
universities, hospitals, household hazardous waste programs and
companies storing five gallon or smaller containers, ECP has
developed seismic secondary containment shelving.
These include a sump to catch any leaks that might occur, a continuous solid lip to prevent articles from falling, and a drain with a cap to allow drainage from the shelves. The shelves are suspended from a sub-roof frame assembly, with all thread rods to allow for total adjustability for any size containers. The rods also provide seismic protection to items stored on the shelves. If the building is bumped during loading or unloading, the shelves free float, thus preventing items from falling off or spilling. Other manufacturers use rigidly mounted shelving with a l" lip in the front or no lip at all, and no drain. *Patented |
| GSA
Contract GS-28F-0020J CMAS Contract |
Environmental Compliance Products 8907 Warner Ave.,
Suite 122 |
